onlinedealers

BM-10

BM-10
BM-10 $130/ BM-10 iC $153
 

The Basics

The BM-10 headset was designed to be a lightweight (only 3 oz), articulate sounding boomset that is ideal for DXpeditions, mobile, and general rag chewing.

The speakers used in the BM-10 are extremely sensitive and don’t require much AF drive from the transceiver. The frequency response is 60 Hz- 12 kHz with very low distortion. The ear pads are replaceable acoustic foam.

The BM-10 comes in two versions, a BM-10-Dynamic and a BM-10-iC (electret), to accommodate many radios on the market today.

The BM-10-Dynamic headset uses a dynamic element designed specifically for communications use. This 600 ohm dynamic element with work on most Amateur Radio rigs.

The BM-10-iC, using our iC electret element, was created for use on the Icom radios. Working with Icom America this element has been made to eliminate the low gain audio on some older and non-pro series radios. This element must be paired with the AD-1-IC (included) or AD-1-ICM adapter. The “iC” adapters have no internal d.c. blocking capacitor so power is passed allowing the iC electret element to operate. The iC element has an operating frequency response of 35Hz - 12kHz.

The microphone audio for the BM-10 series terminates into a 1/8” male plug while the head phone terminates into a 1/8“ stereo plug. (1/8” to 1/4” adapter included), and the in line PTT terminates in a 1/4” mono plug. The cable features a built in Push to Talk (PTT) button with a conveinent clip on the back to keep it in place.

The use of the AD-1 series mic adapters allow simple interface with popular transceiver inputs. The adapter is 6-8” long and has a 1/8” female input jack for the boomset microphone while the 1/4” female that exits the adapter is the PTT (push to talk) line for the Heil foot switch or hand switch. The 1/8” or 1/4” stereo plug goes into the headphone jack on the transceiver front panel.

The boom is held to the headphone speaker by the use of a boom clip. When removing the boom it is imperative to pull straight down and out of the clip not to the side as this may break the clip.

Tension adjustments of the earphones to your ears is done by bending the spring stainless steel pieces as they exit the headphone speaker. More or less pressure can be applied to the ears by proper adjustment.

If you have any questions regarding the proper headset or interface cable for your setup please contact your local Heil Sound dealer or contact us direct at (618) 257-3000 / info@heilsound.com.

 
Additional Images (click to enlarge)
 
 

SPECS

Heilsound Microphones and Accessories
Download
Spec Sheet
 
 

ADD-ONS

Connecting Cables
Find the right cables to connect your Heil Sound products to your transceiver.
HB-1 Boom
From standard mic stand duty, to sophisticated shock mounted articulating boom choirs, the HB-1, PL2T, and SB-2 Booms all accept standard 5/8" -27 threaded microphone hardware and offer unlimited positioning.
Bases
The CB-1 PTT is a heavy, base stand with a built-in push-to-talk (PTT) button & remote cable. Standard 5/8" - 27 threading ensures flawless use with industry standards mics.
Bases
A stylish way to protect your Heil gear.
Hand Switch
Ergonomic push to talk to switch
FS-3
Foot operated push to talk switches
Shock Mounts
Heil shock mounts provide ultimate shock protection for the PR 20, PR 22 and similar body sizes  (SM-1), and for the PR 30, PR 40 and similar body sizes (PRSM).
Heilsound Microphones and Accessories
Whether you sing, play an instrument, or just want to support the efforts of those who do, you’ll look cool wearing a T-shirt baring the logo of the world’s finest microphones.
Heilsound Microphones and Accessories
Ham Radio Handbook is a guide for Amateur Radio explaining antenna theory, construction tips to build your own gear and simple explanations of basic electronics. It is a ‘how to guide’ for setting up a station and much, much more.