Hardware

    Hardware

    FL 2

    FL-2
    $28
    For the PL2T, SB-2 and HB-1
    The optional FL-2 Flange Mount allows the PL2T to be permanently mounted to a desk or table top using three (supplied) screws. The Heil FL-2 Flange Mount also has a security lock, so the PL2T can be tightened to the exact position desired. The brass insert accepts a 1/2" Stem.
    Click here for product dimensions.
     

     

    RS 1

    RS 1
    $28
    For the PL2T, SB-2 and HB-1
    The RS-1 is a 12" riser that allows you to mount the Heil PL2T behind your desk top equipment and pull the PL2T over to you. It's a very classy way to position your Heil microphone. The brass insert accepts a 1/2" Stem.
    Click here for product dimensions.
     

     

    DT 1

    DT 1
    $35
    For the PL2T, SB-2 and HB-1
    The DT-1 is a flush mount for the PL2T. Drill a 1.5" hole in the desk top, then tighten the large washer and nut of the DT-1 from below the desk. This creates the ultimate in a classy mount for all Heil booms. The brass insert accepts a 1/2" Stem. Requires a 1.5" hole for mounting and will mount to surfaces 1/2" - 2" thick.
    Click here for product dimensions.
     

     

    WM 1

    WM 1
    $22
    For Heil booms
    The WM-1 is a unique mount for the Heil booms that allows them to be mounted on a vertical surface. The brass insert of the WM-1 insures smooth, perfect fit. The brass insert accepts a 1/2" Stem.
    Click here for product dimensions.
     

     

    C-Clamp

    C Clamp
    $22
    Replacement C-clamp
    The ideal way to mount your PL2T, SB-2 or HB-1 boom when space is at a premium. Brass insert for smooth, low friction from side to side. Brass insert accepts up to 1/2"/13mm stem. Easily mounts to work surface up to 2"/50.8mm thick. 
    Click here for product dimensions.